apply origin

Use apply origin to set the ORIGIN attribute for BGP routes.

Use undo apply origin to restore the default.

Syntax

apply origin { egp as-number | igp | incomplete }

undo apply origin

Default

No ORIGIN attribute is set for BGP routes.

Views

Routing policy node view

Predefined user roles

network-admin

Parameters

egp as-number: Sets the ORIGIN attribute to EGP. The as-number argument specifies an AS number in the range 1 to 4294967295 for EGP routes.

igp: Sets the ORIGIN attribute to IGP.

incomplete: Sets the ORIGIN attribute to UNKNOWN.

Examples

# Configure node 10 in permit mode for routing policy policy1 to set the ORIGIN attribute to IGP for BGP routes matching AS path list 1.

<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match as-path 1
[Sysname-route-policy-policy1-10] apply origin igp