ipv6 policy-based-route (interface view)

Use ipv6 policy-based-route to configure IPv6 interface PBR by applying an IPv6 policy to an interface.

Use undo ipv6 policy-based-route to restore the default.

Syntax

ipv6 policy-based-route policy-name

undo ipv6 policy-based-route

Default

No IPv6 is applied to an interface.

Views

Interface view

Predefined user roles

network-admin

Parameters

policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. The specified policy must already exist.

Usage guidelines

You can apply only one policy to an interface. Before you apply a new policy, remove the current policy from the interface.

Examples

# Apply policy aaa to VLAN-interface 2.

<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 policy-based-route aaa

Related commands

display ipv6 policy-based-route setup

ipv6 policy-based-route (system view)