ipv6 policy-based-route (system view)

Use ipv6 policy-based-route to create an IPv6 policy node and enter its view, or enter the view of an existing IPv6 policy node.

Use undo ipv6 policy-based-route to delete an IPv6 policy or IPv6 policy node.

Syntax

ipv6 policy-based-route policy-name [ deny | permit ] node node-number

undo ipv6 policy-based-route policy-name [ deny | node node-number | permit ]

Default

No IPv6 policy nodes exist.

Views

System view

Predefined user roles

network-admin

Parameters

policy-name: Specifies a policy name, a case-sensitive string of 1 to 19 characters.

deny: Specifies the match mode for the policy node as deny.

permit: Specifies the match mode for the policy node as permit (default mode).

node node-number: Specifies the number of the IPv6 policy node. A smaller number has a higher priority. The value range for the node-number argument is 0 to 255.

Usage guidelines

To delete an IPv6 policy that has already applied to an interface, you must delete the policy from the interface first.

If a policy node is specified, the undo ipv6 policy-based-route command deletes the specified policy node. If a match mode is specified, the command deletes all nodes configured with the match mode. If no node is specified, the command deletes the whole policy.

Examples

# Create permit-mode Node 10 for IPv6 policy aaa and enter its view.

<Sysname> system-view
[Sysname] ipv6 policy-based-route aaa permit node 10
[Sysname-pbr6-aaa-10]

Related commands

display ipv6 policy-based-route