ipv6 local policy-based-route

Use ipv6 local policy-based-route to configure IPv6 local PBR based on a specified policy.

Use undo ipv6 local policy-based-route to restore the default.

Syntax

ipv6 local policy-based-route policy-name

undo ipv6 local policy-based-route

Default

No policy is referenced for IPv6 local PBR.

Views

System view

Predefined user roles

network-admin

Parameters

policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. The specified IPv6 policy must already exist.

Usage guidelines

You can apply only one policy locally. Before you apply a new policy, you must first remove the current policy.

IPv6 local PBR is used to route locally generated packets except the packets destined for the sender. This feature might affect local services. Do not configure IPv6 local PBR unless doing so is required.

Examples

# Configure IPv6 local PBR based on policy aaa.

<Sysname> system-view
[Sysname] ipv6 local policy-based-route aaa

Related commands

display ipv6 policy-based-route setup

ipv6 policy-based-route (system view)