Appendix B FRUs
The HPE 5130 24G SFP 4SFP+ EI switch provides two power supply slots. One power supply can meet the power requirement of the switch. You can install two power supplies on the switch for redundancy. Table 11 describes the power supplies available for the HPE 5130 24G SFP 4SFP+ EI switch.
Table 11: Power supplies available for the HPE 5130 24G SFP 4SFP+ EI switch
Power supply model | Item | Specification | Remarks |
---|---|---|---|
PSR150-A(JD362A) PSR150-A1(JD362B) | Rated input voltage | 100 VAC to 240 VAC @ 50 Hz or 60 Hz | For more information about the power supplies, see HPE PSR150-A & PSR150-D Power Supplies User Guide. |
Max input voltage | 90 VAC to 264 VAC @ 47 Hz to 63 Hz | ||
Max output power | 150 W | ||
PSR150-D(JD366A) PSR150-D1(JD366B) | Rated input voltage | –48 VDC to –60 VDC | |
Max input voltage | –36 VDC to –72 VDC | ||
Max output power | 150 W |
When two power supplies are installed, you can hot-swap a power supply. To avoid device damage and bodily injury, follow the procedures in Figure 16 and Figure 17 to install and remove the power supply.