nat traversal
Syntax
nat traversal
undo nat traversal
View
IKE peer view
Default level
2: System level
Parameters
None
Description
Use the nat traversal command to enable the NAT traversal function of IKE/IPsec.
Use the undo nat traversal command to disable the NAT traversal function of IKE/IPsec.
By default, the NAT traversal function is disabled.
Examples
# Enable the NAT traversal function for IKE peer peer1.
<Sysname> system-view [Sysname] ike peer peer1 [Sysname-ike-peer-peer1] nat traversal