local-name

Syntax

local-name name

undo local-name

View

IKE peer view

Default level

2: System level

Parameters

name: Name for the local security gateway to be used in IKE negotiation, a case-sensitive string of 1 to 32 characters.

Description

Use the local-name command to configure a name for the local security gateway to be used in IKE negation.

Use the undo local-name to restore the default.

By default, the device name is used as the name of the local security gateway view.

If you configure the id-type name or id-type user-fqdn command on the initiator, the IKE negotiation peer uses the security gateway name as its ID to initiate IKE negotiation, and you must configure the ike local-name command in system view or the local-name command in IKE peer view on the local device. If you configure both the ike local-name command and the local-name command, the name configured by the local-name command is used.

The IKE negotiation initiator sends its security gateway name as its ID to the peer, and the peer uses the security gateway name configured with the remote-name command to authenticate the initiator. Make sure the local gateway name matches the remote gateway name configured on the peer.

Relate commands: remote-name, id-type.

Examples

# Set the name of the local security gateway to localgw in IKE peer view of peer1.

<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] local-name localgw