peer
Syntax
peer { multi-subnet | single-subnet }
undo peer
View
IKE peer view
Default level
2: System level
Parameters
multi-subnet: Sets the subnet type to multiple.
single-subnet: Sets the subnet type to single.
Description
Use the peer command to set the subnet type of the peer security gateway for IKE negotiation.
Use the undo peer command to restore the default.
By default, the subnet is a single one.
Use this command to enable interoperability with a NetScreen device.
Examples
# Set the subnet type of the peer security gateway to multiple.
<Sysname> system-view [Sysname] ike peer xhy [Sysname-ike-peer-xhy] peer multi-subnet