local-address

Syntax

local-address ip-address

undo local-address

View

IKE peer view

Default level

2: System level

Parameters

ip-address: IP address of the local security gateway to be used in IKE negotiation.

Description

Use the local-address command to configure the IP address of the local security gateway in IKE negotiation.

Use the undo local-address command to remove the configuration.

By default, the primary address of the interface referencing the IPsec policy is used as the local security gateway IP address for IKE negotiation. Use this command if you want to specify a different address for the local security gateway.

Examples

# Set the IP address of the local security gateway to 1.1.1.1.

<Sysname> system-view
[Sysname] ike peer xhy
[Sysname-ike-peer-xhy] local-address 1.1.1.1