interval-time

Syntax

interval-time interval-time

undo interval-time

View

IKE DPD view

Default level

2: System level

Parameters

interval-time: Sets DPD interval in seconds, in the range of 1 to 300 seconds. When the local end sends an IPsec packet, it checks the time the last IPsec packet was received from the peer. If the time interval exceeds the DPD interval, it sends a DPD hello to the peer.

Description

Use the interval-time command to set the DPD query triggering interval for a DPD detector.

Use the undo interval-time command to restore the default.

The default DPD interval is 10 seconds.

Examples

# Set the DPD interval to 1 second for dpd2.

<Sysname> system-view
[Sysname] ike dpd dpd2
[Sysname-ike-dpd-dpd2] interval-time 1