Configuration task list

Tasks at a glance
(Required.) Enabling IP multicast routing
(Optional.) Configuring multicast routing and forwarding: (Optional.) Configuring static multicast routes (Optional.) Specifying the longest prefix match principle (Optional.) Configuring multicast load splitting (Optional.) Configuring a multicast forwarding boundary (Optional.) Configuring static multicast MAC address entries (Optional.) Setting the hardware resource multicast mode

Tasks at a glance

(Required.) Enabling IP multicast routing

(Optional.) Configuring multicast routing and forwarding:

(Optional.) Configuring static multicast routes
(Optional.) Specifying the longest prefix match principle
(Optional.) Configuring multicast load splitting
(Optional.) Configuring a multicast forwarding boundary
(Optional.) Configuring static multicast MAC address entries
(Optional.) Setting the hardware resource multicast mode

NOTE:

The device can route and forward multicast data only through the primary IP addresses of interfaces, rather than their secondary addresses or unnumbered IP addresses. For more information about primary and secondary IP addresses, and IP unnumbered, see Layer 3—IP Services Configuration Guide.

prev	up	next
Static multicast routes	home	Enabling IP multicast routing