Configuring static multicast routes
To configure a static multicast route for a multicast source, you can specify an RPF interface or an RPF neighbor for the multicast traffic from that source.
To configure a static multicast route:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Configure a static multicast route. | ip rpf-route-static [ vpn-instance vpn-instance-name ] source-address { mask-length | mask } { rpf-nbr-address | interface-type interface-number } [ preference preference ] | By default, no static multicast route exists. |
3. (Optional.) Delete static multicast routes. |
| N/A |