Configuring TEI treatment on the BRI interface

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter BRI interface view.	interface bri interface-number	N/A
3. Request the switch for a new TEI each time a B channel on the BRI interface places a call.	isdn two-tei	Optional. All B channels on the BRI interface use the same TEI by default.

Step

Command

Remarks

1. Enter system view.

system-view

N/A

2. Enter BRI interface view.

interface bri interface-number

N/A

3. Request the switch for a new TEI each time a B channel on the BRI interface places a call.

isdn two-tei

Optional.

All B channels on the BRI interface use the same TEI by default.

prev	up	next
Setting the progress indicator value in ISDN signaling messages	home	Configuring an ISDN BRI leased line