RTP priority queuing configuration example
Network requirements
Configure RTP priority queuing on interface Serial 2/0 as follows:
The start port number is 16384, the end port number is 32767, and 64 kbps bandwidth is reserved for RTP packets. When congestion occurs to the outgoing interface, RTP packets are assigned to the RTP priority queue.
Configuration procedure
# Enter system view.
<Sysname> system-view
# Enter interface view.
[Sysname] interface serial 2/0
# Configure RTP priority queuing on interface Serial 2/0: the start port number is 16384, the end port number is 32767, and 64 kbps of bandwidth is reserved for RTP packets. When congestion occurs to the outgoing interface, RTP packets are assigned to the RTP priority queue.
[Sysname-Serial2/0] qos rtpq start-port 16384 end-port 32767 bandwidth 64