Configuration procedure
To configure RTP priority queuing:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view or PVC view. | Enter interface view:interface interface-type interface-number
| N/A |
3. Configure RTP priority queuing. | qos rtpq start-port first-rtp-port-number end-port last-rtp-port-number bandwidth bandwidth [ cbs cbs ] | N/A |
4. Display RTP priority queuing configuration information on the interface/PVC or all interfaces/PVCs. | display qos rtpq interface [ interface-type interface-number [ pvc { pvc-name [ vpi/vci ] | vpi/vci } ] ] [ | { begin | exclude | include } regular-expression ] | Optional. Available in any view. |
You must enable the rate limit function for the queuing function to take effect on these interfaces: tunnel interfaces, subinterfaces, HDLC link bundle interfaces, and VT/dialer interfaces configured with PPPoE, PPPoA, PPPoEoA, PPPoFR, or MPoFR (frame relay traffic shaping is not enabled on the frame relay interface).