Index

Symbols

802.1p priority
classifier, Classifier-based traffic marking
packet marking, Classifier-based traffic marking
global QoS, Assigning an 802.1p priority for a global TCP/UDP classifier, Assigning an 802.1p priority to IPv4 packets on the basis of the ToS precedence bits, Assigning a priority for a global Layer-3 protocol classifier
priority, Classifier-based traffic marking
802.1Q VLAN tagging, 802.1Q VLAN tagging, Enabling and disabling GVRP on the switch (CLI)

A

alias
with show VLAN commands, Customizing the show VLANs output (CLI)

B

bandwidth
effect of QoS, Quality of Service (QoS): Managing bandwidth effectively
Bootp
gateway ignored, The primary VLAN
BYOD-redirect
Associate VLAN, Associating with the BYOD server on a specified VLAN
configuration
distribution switch, BYOD configuration on a distribution switch
Configuring
creating a BYOD server, Creating a BYOD server
configuring, Configuring
associating a BYOD server, Associating a BYOD server
client authentication on edge switch, Client authentication configuration on edge switch
creating a BYOD ACL rule, Creating a BYOD ACL rule
Features
VLAN, Features
features, Introduction
interoperability, Interoperability with other switch features
implementing
BYOD-redirect configuration, Implementing BYOD-redirect configuration
BYOD-redirect configuration example, Implementing BYOD-redirect configuration examples
interoperability, Interoperability with other switch features
Comware, Interoperability with other vendors
Introduction, Introduction
restrictions, Restrictions
show commands, Show commands
show portal free-rule, Show portal free rule
show portal redirect statistics, Show portal redirect statistics
show portal server, Show portal server
SNMP interactions, SNMP Interactions
VLAN
SNMP, SNMP Interactions

C

classifier-based QoS
marking packets, Classifier-based traffic marking
Command Syntax
show
logging, Troubleshooting stacking problems
Command syntax
debug rpvst, Using RPVST+ debug
disable layer3 vlan, Interaction with other features
gvrp, Enabling and disabling GVRP on the switch (CLI)
interface, Deleting multiple VLANs
interface qos dscp, Assigning a DSCP policy based on the source-port
interface qos priority, Assigning a priority based on source-port
interface unknown-vlans, Controlling how individual ports handle advertisements for new VLANs (CLI)
ip-recv-mac-address, Configuring a VLAN MAC address with heartbeat interval
interval, Configuring a VLAN MAC address with heartbeat interval
loop-protect, Configuring loop protection
management-vlan, Configuring an existing VLAN as the Management VLAN (CLI)
max-vlans, Changing the number of VLANs allowed on the switch (CLI)
no interface qos, Assigning a priority based on source-port, Assigning a DSCP policy based on the source-port
no qos device-priority, Assigning a priority based on IP address, Assigning a DSCP policy based on IP address
no qos dscp-map, Configuring DSCP policies for codepoints
no qos type-of-service, Assigning a DSCP policy on the basis of the DSCP in IPv4 packets received from upstream devices
no vlan, Deleting a static VLAN (CLI)
no vlan qos, Assigning a priority based on VLAN-ID, Assigning a DSCP policy based on VLAN-ID
portal free-rule, Creating a BYOD ACL rule
portal web-server url, Creating a BYOD server
primary-vlan, Changing the Primary VLAN (CLI)
qos device-priority, Assigning a priority based on IP address
qos device-priority dscp, Assigning a DSCP policy based on IP address
qos dscp-map priority, Configuring DSCP policies for codepoints
qos protocol, Assigning a priority for a global Layer-3 protocol classifier
qos queue-config, QoS queue configuration
qos type-of-service diff-services, Assigning an 802.1p priority to IPv4 packets on the basis of incoming DSCP, Assigning a DSCP policy on the basis of the DSCP in IPv4 packets received from upstream devices
qos type-of-service diff-services dscp, Assigning a DSCP policy on the basis of the DSCP in IPv4 packets received from upstream devices
qos type-of-service ip-precedence, Assigning an 802.1p priority to IPv4 packets on the basis of the ToS precedence bits
show egress port-queue drop, QoS port egress-queue drop counters
show gyrp, Displaying switch current GVRP configuration (CLI), Displaying switch current GVRP configuration (CLI)
show history timestamp, Show stacking and show history timestamp
show ip-recv-mac-address, Displaying a VLAN MAC address configuration (CLI), Displaying a VLAN MAC address configuration (CLI)
show loop-protect, Displaying loop protection status, Displaying loop protection status in VLAN mode
show portal free-rule, Show portal free rule
show portal tcp-cheat statistics, Show portal redirect statistics
show portal web-server, Show portal server
show qos, Viewing the QoS configuration
show qos device-priority, Assigning a priority based on IP address, Assigning a DSCP policy based on IP address
show qos dscp-map, Differentiated Services Codepoint (DSCP) mapping
show qos port-priority, Assigning a priority based on source-port
show qos protocol-priority, Assigning a priority for a global Layer-3 protocol classifier
show qos queue config, QoS queue configuration
show qos queue-config, Viewing the QoS queue configuration
show qos source-port, Assigning a DSCP policy based on the source-port
show qos tcp-udp-port-priority, Assigning an 802.1p priority for a global TCP/UDP classifier, Creating a DSCP policy based on TCP/UDP port number classifiers
show qos type-of-service, Assigning a DSCP policy on the basis of the DSCP in IPv4 packets received from upstream devices
show qos vlan-priority, Assigning a priority based on VLAN-ID, Assigning a DSCP policy based on VLAN-ID
show spanning-tree, Displaying global MSTP status, Displaying global and VLAN spanning tree status
show spanning-tree <port-list>, Displaying global MSTP status, Displaying status for a specific port list
show spanning-tree <port-list> config instance, Displaying per-instance MSTP configurations
show spanning-tree <port-list> detail , Listing ports to see which have PVST protection or filtering enabled
show spanning-tree <port-list> instance
detail, Displaying status for a specific MST instance
show spanning-tree bpdu-protection , Displaying BPDU protection status, Viewing BPDU protection status, Displaying BPDU status and related information
show spanning-tree config , Displaying the global MSTP configuration, Displaying the global RPVST+ configuration, Displaying the global RPVST+ configuration per port
show spanning-tree config instance, Displaying per-instance MSTP configurations
show spanning-tree config vlan, Displaying the global RPVST+ configuration per VLAN
show spanning-tree configuration, Viewing BPDU filtering
show spanning-tree debug vlan, Displaying debug counters per-VLAN, Displaying debug counters per-port per-VLAN
show spanning-tree debug-counters, Displaying debug counters for all MST instances, Displaying debug counters for all VLAN instances
show spanning-tree debug-counters instance , Displaying debug counters for one MST instance, Displaying debug counters for ports in an MST instance
show spanning-tree detail
, Displaying detailed port information
show spanning-tree instance, Displaying status for a specific MST instance
detail, Displaying status for a specific MST instance
show spanning-tree mst-config
, Displaying the region-level configuration
show spanning-tree pending, Displaying the pending MSTP configuration
show spanning-tree root-history, Displaying the change history of root bridges
show spanning-tree root-history vlan, Displaying the change history of root bridges
show spanning-tree system-limits rapid-pvst, Displaying RPVST+ VLAN and vPort system limits
show spanning-tree traps, Enabling traps and displaying trap configuration
show spanning-tree vlan, Displaying status for a specific VLAN, Displaying status per-port per-VLAN, Displaying the global RPVST+ configuration per port per VLAN
show stacking, Show stacking and show history timestamp
show vlan ports, Viewing the VLAN membership of one or more ports (CLI)
show vlans , Displaying a switch VLAN configuration, Viewing the configuration for a particular VLAN (CLI), Listing static and dynamic VLANs on a GVRP-enabled switch (CLI)
show vlans custom , Customizing the show VLANs output (CLI)
spanning-tree, Enabling or disabling spanning tree operation
bpdu-filter, Configuring BPDU filtering
spanning-tree <port-list> bpdu-protection, Enabling and disabling BPDU protection
spanning-tree <port-list> bpdu-protection-timeout, Enabling and disabling BPDU protection
spanning-tree <port-list> loop-guard, STP loop guard
spanning-tree <port-list> pvst-filter, Enabling and disabling PVST filters on ports
spanning-tree <port-list> pvst-protection, Enabling and disabling PVST protection on ports
spanning-tree [ enable | disable ], Enabling or disabling RPVST+ spanning tree
spanning-tree admin-edge-port, Enabling immediate transition to forwarding on end nodes, Configuring per-port spanning tree
spanning-tree auto-edge-port, Identifying edge ports automatically, Configuring per-port spanning tree
spanning-tree bpdu-filter, Configuring per-port spanning tree, BPDU filtering
spanning-tree bpdu-protection, Configuring per-port spanning tree, Configuring and managing BPDU protection
spanning-tree bpdu-protection-timeout , Re-enabling a port manually, Configuring global spanning tree, Configuring and managing BPDU protection
spanning-tree clear-debug-counters, Clearing spanning tree debug counters, Using RPVST+ debug
spanning-tree config-name, Resetting the configuration name of the MST region in which a switch resides
spanning-tree config-revision, Designating the revision number of the MST region for a switch
spanning-tree extend system-id, Configuring global spanning tree
spanning-tree force-version, Setting the spanning tree compatibility mode
spanning-tree forward-delay, Setting the time interval between listening, learning and forwarding states
spanning-tree hello-time, Specifying the time interval between BPDU transmissions, Specifying the interval between BPDU transmissions
spanning-tree ignore-pvid-inconsistency, Configuring global spanning tree, Allowing traffic on VLAN ID (PVID) mismatched links
spanning-tree instance, Configuring MST instance parameters
priority, Setting the priority for a port in a specified MST instance
vlan, Preconfiguring VLANs in an MST instance
spanning-tree instance path-cost, Assigning a port cost for an MST instance
spanning-tree instance priority, Setting the bridge priority for an instance
spanning-tree legacy-mode, Setting spanning tree to operate in 802. ID legacy mode
spanning-tree legacy-path-cost, Setting spanning tree to operate in 802. ID legacy mode
spanning-tree log state-transitions, Configuring global spanning tree
spanning-tree loop-guard, Configuring STP loop guard
spanning-tree max-hops, Setting the hop limit for BPDUs
spanning-tree maximum age, Setting the maximum age of received STP information
spanning-tree mcheck, Forcing a port to send RST/MST BPDUs
spanning-tree mode, Selecting RPVST+ as the spanning tree mode
spanning-tree mode mstp, Selecting MSTP as the spanning tree mode
spanning-tree mode rapid-pvst, General steps for configuring RPVST+
spanning-tree path-cost, Determining which ports are forwarding ports by assigning port cost
spanning-tree pathcost, Configuring per-port per-VLAN spanning tree
spanning-tree pending, Manipulating the pending MSTP configuration, Enabling an entire MST region at once or exchanging one region configuration for another
spanning-tree point-to-point-mac, Informing the switch of the device type to which a port connects, Configuring per-port spanning tree
spanning-tree port vlan pathcost, Configuring per-port per-VLAN spanning tree
spanning-tree port vlan priority path-cost, Configuring per-port per-VLAN spanning tree
spanning-tree priority, Setting the bridge priority for a region and determining the root switch, Determining which port to use for forwarding, Setting the priority for specified ports for the IST
spanning-tree root-guard, Denying a port the role of root port, Configuring per-port spanning tree
spanning-tree show <port> configuration , Displaying BPDU filtering
spanning-tree tcn-guard, Denying a port propagation change information, Configuring per-port spanning tree
spanning-tree trap, Enabling SNMP traps, Enabling traps and displaying trap configuration
spanning-tree trap errant-bpdu , Enabling and disabling BPDU protection, Configuring and managing BPDU protection
spanning-tree vlan, General steps for configuring RPVST+
spanning-tree vlan [ enable | disable ], Enabling or disabling RPVST+ spanning tree
spanning-tree vlan forward-delay, Configuring per-VLAN spanning tree
spanning-tree vlan hello-time, Configuring per-VLAN spanning tree
spanning-tree vlan maximum age, Configuring per-VLAN spanning tree
spanning-tree vlan priority, Configuring per-VLAN spanning tree
spanning-tree vlan root, Configuring per-VLAN spanning tree
static-vlan, Converting a dynamic VLAN to a static VLAN (CLI)
vlan, Creating a new static VLAN (port-based or protocol-based) (CLI), Configuring or changing static VLAN per-port settings (CLI)
vlan portal web-server, Associating a BYOD server, Associating with the BYOD server on a specified VLAN
vlan qos dscp, Assigning a DSCP policy based on VLAN-ID
vlan qos priority , Prioritizing voice VLAN QoS (Optional), Assigning a priority based on VLAN-ID
configuration
factory default, Configuring VLANs, Using the CLI to configure port-based and protocol-based VLAN parameters
contacting HP, Contacting HP
conventions
document, Typographic conventions
text symbols, Typographic conventions

D

default settings
ip-recv-mac-address interval, Configuring a VLAN MAC address with heartbeat interval
management VLAN, Configuring an existing VLAN as the Management VLAN (CLI)
MSTP, Configuring MSTP at a glance
restoring MAC address , Configuring a VLAN MAC address with heartbeat interval
VLAN name, Creating a new static VLAN (port-based or protocol-based) (CLI), Displaying a switch VLAN configuration
VLAN qos priority, Prioritizing voice VLAN QoS (Optional)
default VLAN, Using the CLI to configure port-based and protocol-based VLAN parameters
delete
Multiple VLANs, Deleting multiple VLANs
DHCP
gateway ignored, The primary VLAN
document
conventions, Typographic conventions
documentation
providing feedback on, Documentation feedback
DSCP codepoint
packet marking
global QoS, Assigning a DSCP policy for a global TCP/UDP classifier

G

gateway
manual config priority, The primary VLAN
GVRP
ACL restrictions, GVRP operational rules
advertisement, GVRP operational rules, Parameters for controlling VLAN propagation behavior
advertisement responses, Options for a GVRP-aware port receiving advertisements
benefits, About GVRP
converting dynamic to static, IP addressing
converting to static VLAN, About GVRP
dynamic VLAN and reboots, GVRP operational rules
dynamic VLANs always tagged, Using GVRP
IP addressing, IP addressing
learn, Options for handling unknown VLAN advertisements
maximum VLANs, , GVRP operational rules
non-GVRP aware device, GVRP operational rules
operating notes, GVRP operational rules
port control options, Advertisements and dynamic joins
port-leave from dynamic, Port-Leave from a dynamic VLAN
recommended tagging, Parameters for controlling VLAN propagation behavior
tagged, dynamic VLAN, Using GVRP
unknown VLAN, Parameters for controlling VLAN propagation behavior
unknown VLAN options, Per-port options for handling GVRP "unknown VLANs"
VLAN behavior, Per-port static VLAN configuration options example
VLAN, dynamic adds, Adding or editing VLAN names (Menu)
GVRP block
disabling, Options for handling unknown VLAN advertisements

H

help
obtaining, Contacting HP
HP
subscription service, Subscription service
technical support, Contacting HP

I

IP
gateway, The primary VLAN
traffic priority based on ToS field, QoS IP Type-of-Service (ToS) policy and priority
types of service
configuring priority, QoS IP Type-of-Service (ToS) policy and priority
IP address
match criteria
global QoS, Global IP-device classifier
IPv4
ARP VLAN requirement, VLAN operating notes
protocol VLAN ARP requirement, Creating a new static VLAN (port-based or protocol-based) (CLI)
IPv6
management VLAN , Operating notes for Management VLANs

J

jumbo frames
GVRP, Enabling and disabling GVRP on the switch (CLI)

L

Layer-3 protocol
match criteria
global QoS, Global Layer-3 protocol classifier
loop protection
MSTP
trap transmit interval, Configuring loop protection
used for unmanaged devices, Overview

M

MAC address
duplicate, Multiple VLAN considerations
per switch, Multiple VLAN considerations
per VLAN, Multiple VLAN considerations
same for all VLANs, VLAN MAC address
single forwarding database, Multiple VLAN considerations
marking packets
classifier-based QoS, Classifier-based traffic marking
match criteria
IP-device, Global IP-device classifier
Layer-3 protocol, Global Layer-3 protocol classifier
TCP/UDP, Global TCP/UDP classifier
mesh
management VLAN, Operating notes for Management VLANs
message
VLAN already exists, Configuring or changing static VLAN per-port settings (CLI)
MSTP (see spanning tree (MSTP))
Multiple Instance Spanning Tree (see spanning tree (MSTP))
Multiple port-based VLANs, Multiple port-based VLANs

O

outbound port queue (QoS)
configuring the number of queues, Configuring the number of priority queues
determined by 802.1p priority, Using QoS to classify and prioritize network traffic
determined by DSCP policy, Using QoS to classify and prioritize network traffic

P

packet marking
802.1p priority, Classifier-based traffic marking
classifier-based QoS, Classifier-based traffic marking
port
monitoring, Port monitoring
port egress-queue drop counters, QoS port egress-queue drop counters
port trunk
VLAN, Port trunks
priority
configuring number of queues, QoS queue configuration
priority (QoS)
changing queues per port, QoS queue configuration
criteria for prioritizing packets, Classifiers for prioritizing outbound packets
protocol
ARP requirement, VLAN operating notes
limit, Per-port VLAN configuration options
PVST
enabling, disabling , Enabling PVST protection
manually re-enabling port , Re-enabling a port manually
show configured ports, Displaying all ports with PVST protection enabled

Q

Quality of Service
configuring the number of outbound queues, Configuring the number of priority queues
criteria for prioritizing outbound packets, Classifiers for prioritizing outbound packets
feature description, Using QoS to classify and prioritize network traffic
inbound traffic on network edge, Applying QoS to inbound traffic at the network edge
match criteria, Global TCP/UDP classifier
number of priority queues, QoS queue configuration
outbound VLAN traffic, Preserving QoS in outbound traffic in a VLAN
packet classification, Packet classifiers and evaluation order
packet marking, Classifier-based traffic marking
classifier-based QoS, Classifier-based traffic marking
priority settings mapped to downstream devices, Preserving 802.1p priority
queue configuration, QoS queue configuration

R

Rapid per-VLAN spanning tree, Rapid per-VLAN spanning tree (RPVST+) operation
(see also RPVST+)
routing
non-routable VLAN, Operating notes for Management VLANs
RPVST+, Rapid per-VLAN spanning tree (RPVST+) operation
(see also Rapid per-VLAN spanning tree)
BPDU filtering, BPDU filtering
BPDU protection
configuring and managing, Configuring and managing BPDU protection
BPDU status, Displaying BPDU status and related information
configuration steps, General steps for configuring RPVST+
debug, Using RPVST+ debug
debug counters , Displaying debug counters for all VLAN instances
debug counters per-port per-VLAN, Displaying debug counters per-port per-VLAN
debug counters per-VLAN, Displaying debug counters per-VLAN
debug output, Field descriptions for RPVST+ debug command output
default configuration, Working with the default RPVST+ configuration
enabling or disabling, Enabling or disabling RPVST+ spanning tree
event log messages, RPVST+ event log messages
forward delay, Configuring per-VLAN spanning tree
global configuration per port
displaying, Displaying the global RPVST+ configuration per port
global configuration per port per VLAN
displaying, Displaying the global RPVST+ configuration per port per VLAN
global settings, Configuring global spanning tree
maximum age, Configuring per-VLAN spanning tree
mode selection, Selecting RPVST+ as the spanning tree mode
operating notes, Operating notes
per-port per-VLAN settings, Configuring per-port per-VLAN spanning tree
per-port settings, Configuring per-port spanning tree
per-VLAN settings, Configuring per-VLAN spanning tree
priority, Configuring per-VLAN spanning tree
restrictions, Operating notes
root bridge, Configuring per-VLAN spanning tree
sample network, Sample RPVST+ network
status for a specific port list, Displaying status for a specific port list
status for a VLAN, Displaying status for a specific VLAN
traps
enabling and displaying, Enabling traps and displaying trap configuration
VLAN and vPort limits, Displaying RPVST+ VLAN and vPort system limits

S

spanning tree
comparing options, Comparing spanning tree options
MSTP
active path, How separate instances affect MSTP
BPDU, Configuring MSTP at a glance, Setting the hop limit for BPDUs, Forcing a port to send RST/MST BPDUs, How separate instances affect MSTP
broadcast storm, Overview
change VLAN instance, Configuring MSTP at a glance
CIST, Specifying the time interval between BPDU transmissions
CIST root, Specifying the interval between BPDU transmissions
compatibility mode, Setting the spanning tree compatibility mode
compatibility with RSTP or STP, MSTP compatibility with RSTP or STP
configuration steps, Configuring MSTP at a glance
CST, Regions, legacy STP and RSTP switches and the Common Spanning Tree (CST)
CST status, Displaying global MSTP status
debug counters, Displaying debug counters for all MST instances, Displaying debug counters for one MST instance, Displaying debug counters for ports in an MST instance
default settings, Configuring MSTP at a glance
display statistics and configuration, Displaying MSTP statistics
enabling a region, Enabling an entire MST region at once or exchanging one region configuration for another
enabling, disabling, Enabling or disabling spanning tree operation
fault tolerance, 802.1s Multiple Spanning Tree Protocol (MSTP)
forward delay, Setting the time interval between listening, learning and forwarding states
forwarding state, Enabling immediate transition to forwarding on end nodes
general operation, Overview
hop count, Setting the hop limit for BPDUs
in a switch mesh, 802.1s Multiple Spanning Tree Protocol (MSTP)
instance, Configuring MSTP at a glance, Configuring MST instance parameters
instance mapping, Preconfiguring VLANs in an MST instance
instance status, Displaying status for a specific MST instance
instance types, Types of Multiple Spanning Tree Instances
instance VLAN, Preconfiguring an MSTP regional topology
IST instance, Configuring MST instance parameters, Preconfiguring VLANs in an MST instance
IST port priority, Setting the priority for specified ports for the IST
loop protection, Loop protection
MIB support, Displaying MSTP statistics
MSTI port priority, Setting the priority for a port in a specified MST instance
operating rules, Operating rules
operation, How MSTP operates
pending configuration, Displaying the pending MSTP configuration
pending option, Designating the revision number of the MST region for a switch
per-port parameters, Configuring MSTP per-port parameters
planning for, Planning an MSTP application
port states, How separate instances affect MSTP
preconfigure VLANs in instance, Preconfiguring VLANs in an MST instance
priority, Configuring MSTP at a glance
priority resolution, Setting the bridge priority for an instance
priority, device, Setting the bridge priority for a region and determining the root switch
PVST filtering , PVST filtering
PVST protection , PVST protection
redundant links, How separate instances affect MSTP
region, Overview
region configuration, Displaying the region-level configuration
region name, Resetting the configuration name of the MST region in which a switch resides
regions, MST regions
root history, Displaying the change history of root bridges
root switch instance, Setting the bridge priority for an instance
routed traffic, How separate instances affect MSTP
saving current configuration, Saving the current configuration before a software upgrade
troubleshooting, Troubleshooting an MSTP configuration
trunked link, Displaying the global MSTP configuration, MSTP operation with 802.1Q VLANs
viewing global configuration, Displaying the MSTP configuration
VLAN instance assigned, Configuring MST instance parameters
VLAN membership, MSTP operation with 802.1Q VLANs
VLAN range option, Configuring MSTP instances with the VLAN range option (Example)
with legacy STP and RSTP, Regions, legacy STP and RSTP switches and the Common Spanning Tree (CST)
with VLANs, MSTP operation with 802.1Q VLANs
RPVST+
admin-edge-port, Configuring per-port spanning tree
auto-edge-port, Configuring per-port spanning tree
BPDU filtering, Configuring per-port spanning tree
BPDU protection, Configuring per-port spanning tree
global configuration, Displaying the global RPVST+ configuration
global configuration per VLAN, Displaying the global RPVST+ configuration per VLAN
global status, Displaying global and VLAN spanning tree status
history of root bridges, Displaying the change history of root bridges
ignore PVID inconsistency, Allowing traffic on VLAN ID (PVID) mismatched links
loop guard, Configuring STP loop guard
root guard, Configuring per-port spanning tree
status for a port list and VLAN, Displaying status per-port per-VLAN
TCN guard, Configuring per-port spanning tree
troubleshooting, Troubleshooting an RPVST+ configuration
SNMP
traps, Enabling SNMP traps
VLAN effect on, Spanning Tree operation with VLANs
stacking
adding a new member, Adding a switch to a stack as a new member
bad cable, Troubleshooting a bad cable
benefits, Introduction
Commander
electing, Electing a Commander
commander
removing, Removing the Commander
creating a stack, Creating a stack
deployment solutions, Troubleshooting installation and deployment issues
deterministic method, Using the deterministic method
downloading new software, Downloading new software to the stack
fault recovery, Using fault recovery/troubleshooting tools
installation solutions, Troubleshooting installation and deployment issues
maximum stack members exceeded, Troubleshooting maximum stack members exceeded
members
adding and removing , Troubleshooting issues when adding or removing members in the stack
merging stack fragments, Merging stack fragments
mismatched stack-ID, Troubleshooting a mismatched stack-ID
monitoring, Monitoring stacking
OOBM issues, Troubleshooting OOBM and split stack issues
OOBM ports
managing, Managing OOBM ports
plug-and-go method, Plug-and-go method
port-level configuration interactions
managing , Managing port-level configuration interactions
re-numbering stack members, Re-numbering stack members
removing a member or standby switch, Removing a Member or the Standby
removing the commander, Removing the Commander
replacing a failed module, Replacing a failed stacking module
replacing a failed stack member, Replacing a failed stack member
restoring after cable disconnection, Restoring operation after disconnecting a stacking cable
restoring after power cord disconnection, Restoring operation after power cord disconnection
split stack issues, Troubleshooting OOBM and split stack issues
Standby
electing, Electing a Standby
strictly provisioned, mismatched MAC address, Troubleshooting a strictly provisioned, mismatched MAC address
strictly provisioned, mismatched type, Troubleshooting a strictly provisioned, mismatched type
switch crash and reboot solutions, Troubleshooting when a switch crashes and reboots
switch-level configuration interactions
managing, Managing switch-level configuration interactions
troubleshooting, Troubleshooting stacking
unexpected Commander or Standby switch selection, Troubleshooting an unexpected Commander or Standby switch selection
unresponsive reboot, Troubleshooting an unresponsive reboot
subnet address, Static VLAN operation
subscription service, HP, Subscription service
SVLAN
delete multiple, Deleting multiple VLANs
symbols in text, Typographic conventions

T

TCP/UDP
match criteria, Global TCP/UDP classifier
packet classification
global QoS, Global TCP/UDP classifier
technical support
HP, Contacting HP
text symbols, Typographic conventions
ToS, Classifier-based traffic marking, QoS IP Type-of-Service (ToS) policy and priority
(see also Type-of-Service)
Type-of-Service, Classifier-based traffic marking, QoS IP Type-of-Service (ToS) policy and priority
(see also ToS)
QoS, QoS IP Type-of-Service (ToS) policy and priority
using to prioritize IP traffic, QoS IP Type-of-Service (ToS) policy and priority
Type-of-Service field (IP)
configuring packet priority, QoS IP Type-of-Service (ToS) policy and priority
typographic conventions, Typographic conventions

U

untagged
VLAN, Per-port VLAN configuration options

V

VID, QoS VLAN-ID (VID) priority
(see also VLAN-ID)
limit, Configuring VLANs
VLAN
already exists message, Configuring or changing static VLAN per-port settings (CLI)
broadcast domain, General VLAN operation
configuration, Using the CLI to configure port-based and protocol-based VLAN parameters
convert dynamic to static, Converting a dynamic VLAN to a static VLAN (CLI)
customizing output, Customizing the show VLANs output (CLI)
dedicated management, The primary VLAN
default, Designated VLANs
default VLAN, VLAN support and the default VLAN
default VLAN name change, VLAN support and the default VLAN
default VLAN VID, VLAN support and the default VLAN
delete multiple, Deleting multiple VLANs
deleting, Creating a new static VLAN (port-based or protocol-based) (CLI), Deleting a static VLAN (CLI), VLAN operating notes
deleting with member ports, Creating a new static VLAN (port-based or protocol-based) (CLI)
duplicate MAC address, Multiple VLAN considerations
dynamic, Using VLANs, General VLAN operation, Using the CLI to configure port-based and protocol-based VLAN parameters, Converting a dynamic VLAN to a static VLAN (CLI)
effect on spanning tree, Spanning Tree operation with VLANs
environments, VLAN environments
external protocol router, VLAN restrictions
gateway IP, The primary VLAN
GVRP, auto, Per-port VLAN configuration options
heartbeat packets, Sending heartbeat packets with a configured MAC Address
IP interface relationship, IP interfaces
layer-3 broadcast domain, Protocol-based VLANs
limit, Configuring VLANs, Using the CLI to configure port-based and protocol-based VLAN parameters
MAC address verification, Displaying a VLAN MAC address configuration (CLI), Displaying a VLAN MAC address configuration (CLI)
maximum capacity, Adding or changing a VLAN port assignment (Menu)
missing VLAN, Adding or changing a VLAN port assignment (Menu)
multiple forwarding database, Multiple VLAN considerations
multiple VLANs on port, Additional VLAN tagging considerations
non-routable, Operating notes for Management VLANs
number allowed, including dynamic, Adding or editing VLAN names (Menu)
obtaining IP address, Obtaining an IP address using DHCP (CLI)
when host is on a different VLAN than the DHCP server, Obtaining the IP address for a host that is on a different VLAN than the DHCP server
port configuration, Example of Networked 802.1Q-compliant devices with multiple VLANs on some ports
port monitoring, Port monitoring
port trunk, Port trunks
primary, Changing VLAN support settings (Menu), Changing the Primary VLAN (CLI), VLAN support and the default VLAN, The primary VLAN
primary VLAN not allowed, Changing the Primary VLAN (CLI)
primary with DHCP, VLAN operating notes
prioritizing traffic with QoS, QoS VLAN-ID (VID) priority
protocol, Protocol VLAN environment, Additional VLAN tagging considerations, Creating a new static VLAN (port-based or protocol-based) (CLI), Viewing the VLAN membership of one or more ports (CLI), Viewing the configuration for a particular VLAN (CLI), VLAN operating notes, IP interfaces
capacity per VLAN, VLAN operating notes
example, Example of Networked 802.1Q-compliant devices with multiple VLANs on some ports
forbid, Configuring or changing static VLAN per-port settings (CLI)
IPv4 routing, Comparative operation of port based and protocol based VLANs
non-routable, Comparative operation of port based and protocol based VLANs, When tagging is needed
primary VLAN not allowed, The primary VLAN
router, external, VLAN environments
routing, VLAN environments
tagged member, Comparative operation of port based and protocol based VLANs
tagging, VLAN environments
traffic separation, Using VLANs
untagged packet forwarding, Untagged packet forwarding
protocol compared to port-based, Comparative operation of port based and protocol based VLANs
protocol routing, VLAN restrictions
restrictions, VLAN restrictions
routing between VLANs, General VLAN operation
routing options, Routing options for VLANs
show VLAN ports detail, Viewing the VLAN membership of one or more ports (CLI)
single forwarding database, Multiple VLAN considerations
static, Using VLANs, Static VLAN operation, Using the CLI to configure port-based and protocol-based VLAN parameters, The primary VLAN
status, Displaying a switch VLAN configuration
subnet, General VLAN operation
tagged, Per-port VLAN configuration options
tagging, Additional VLAN tagging considerations
rules, VLAN tagging rules
untagged, Adding or changing a VLAN port assignment (Menu)
untagged operation, Untagged packet forwarding
untagged,, Per-port VLAN configuration options
VID, Example of tagged and untagged VLAN port assignments, Additional VLAN tagging considerations
voice, Designated VLANs, Displaying a switch VLAN configuration, Viewing the VLAN membership of one or more ports (CLI), Viewing the configuration for a particular VLAN (CLI), VLAN operating notes
voice configuration, Creating a new static VLAN (port-based or protocol-based) (CLI)
VLAN-ID, QoS VLAN-ID (VID) priority
(see also VID)
VLANs
designated, Designated VLANs
port-based, Port-based VLANs
protocol-based, Protocol-based VLANs
Voice VLANs, Using voice VLANs
VoIP
operating rules, VLAN operating notes

W

web sites
HP subscription service, Subscription service
write memory
converting dynamic to static VLAN, GVRP operational rules