Listing static and dynamic VLANs on a GVRP-enabled switch (CLI)

Syntax:

show vlans

Lists all VLANs present in the switch.

Using the show vlans command

In the following illustration, switch B has one static VLAN (the default VLAN), with GVRP enabled and port 1 configured to Learn for Unknown VLANs. Switch A has GVRP enabled and has three static VLANs: the default VLAN, VLAN-222 and VLAN-333. In this scenario, switch B will dynamically join VLAN-222 and VLAN-333:

The show vlans command lists the dynamic (and static) VLANs in switch B after it has learned and joined VLAN-222 and VLAN-333.

Switch-B> show vlans

 Status and Counters - VLAN Information

   VLAN support : Yes
   Maximum VLANs to support : 8
   Primary VLAN : DEFAULT_VLAN

   802.1Q VLAN ID NAME          Status
   -------------- ------------- ------
   1              DEFAULT_VLAN  Static
   222            GVRP_222      Dynamic
   333            GVRP_333      Dynamic

prev	up	next
Controlling how individual ports handle advertisements for new VLANs (CLI)	home	Converting a Dynamic VLAN to a Static VLAN (CLI)