Converting a Dynamic VLAN to a Static VLAN (CLI)

If a port on the switch has joined a dynamic VLAN, you can use the following command to convert that dynamic VLAN to a static VLAN:

static <dynamic-vlan-id>

Converting a dynamic VLAN 333 to a static VLAN

When converting a dynamic VLAN to a static VLAN as shown here, all ports on the switch are assigned to the VLAN in Auto mode.

HP Switch(config)#: static 333

prev	up	next
Listing static and dynamic VLANs on a GVRP-enabled switch (CLI)	home	About GVRP