For more information, see About OSPF passive.
Enter this command in VLAN context:
Syntax:
The no
option disables the passive option; the interface becomes an active interface.
Example
To display the OSPF passive information, enter the command shown in Figure A-14:
show ip ospf interface command with passive configured on an interface
HP Switch(vlan-1)# show ip ospf interface OSPF Interface Status IP Address Status Area ID State Auth-type Cost Priority Passive ---------- ------ ------- ----- --------- ---- -------- ------- 10.10.10.1 enabled 0.0.0.2 down none 1 1 Yes 10.12.13.1 enabled 0.0.0.2 wait none 1 1 No
You can display the OSPF passive information for a particular VLAN, as shown in show ip ospf interface command for a specific VLAN with passive configured on an interface.
show ip ospf interface command for a specific VLAN with passive configured on an interface
HP Switch(config) show ip ospf interface vlan 4 OSPF configuration and statistics for VLAN 4 OSPF Interface Status for 10.10.10.1 IP Address: : 10.10.10.1 Status : enabled AreaID : 0.0.0.2 Passive : Yes State : DOWN Auth-type : none Cost : 1 Chain : Type : BCAST Priority : 1 Transit Delay : 1 Retrans Interval : 5 Hello Interval : 10 Rtr Dead Interval : 40 Designated Router: Events : 0 Backup Desig. Rtr: Passive : yes Neighbors : 2