-
If the authentication type MD5 is configured without a
md5-auth-key-chain
, the authentication will fail. -
If the
md5-auth-key-chain
is configured but authentication type not set to MD5, the authentication will fail. -
If the authentication type MD5 is configured and the
md5-auth-key-chain
is already configured, the MD5 authentication will begin working. -
If the
md5-auth-key-chain
is configured but the authentication type set to MD5, the MD5 authentication will begin working. -
When the MD5 authentication is working and you remove the
md5-auth-key-chain
, the MD5 authentication will fail. -
When the MD5 authentication is working and you change authentication type to other than MD5, the MD5 authentication will fail.
-
When the MD5 authentication is working and you remove the used key-chain from global configuration, the request to remove the used keychain will fail.
-
When the MD5 authentication is working and you remove the key from key-chain in the global configuration, the MD5 authentication will not work.
NOTE: Hewlett Packard Enterprise recommends using a single key in the key-chain.