Show commands

Syntax

show ip rip

Once MD5 authentication is configured, the command will show the authentication type as MD5 for the configured RIPv2 interface.
IP RIP interface under VLAN context
HP-5406Rzl(vlan-1)# show ip rip interface 

RIP interface information
IP Address     Status     Send mode   Recv mode  Metric     Auth
----------  -------  --------- ---------  -----  -----
30.0.0.1        Enabled    V2-only      V2-only     1     MD5

Syntax

Show key-chain key-name

Show association with RIPv2 interface if any.

Show key-chain

DUT1(vlan-30)# show key-chain abc
Chain - test2

Key | Accept Start GMT   Accept Stop GMT   Send Start GMT    Send Stop GMT
--- + ----------------  --------------- --------------  -----------------
1    |  Bootup                  Infinite              Bootup                Infinite

OSPF Interface References
Interface
---------------

OSPF Virtual Link References
Area/Virtual Link
------------------------------

RIP Interface References

Interface
----------
30.0.0.1

prev	up	next
Configuration commands	home	Operating notes