These rules affect removals from a stack:
-
When a Candidate becomes a Member, its
Auto Joinparameter is automatically set toNo. This prevents the switch from automatically rejoining a stack as soon as you remove it from the stack. -
When you use the Commander to remove a switch from a stack, the switch rejoins the Candidate pool for your IP subnet (broadcast domain), with
Auto Joinset toNo. -
When you remove a Member from a stack, it frees the previously assigned switch number (
SN), which then becomes available for assignment to another switch that you may subsequently add to the stack. The default switch number used for an add is the lowest unassigned number in the Member range (1 - 15; 0 is reserved for the Commander).
To remove a Member from a stack, use the Stack Management screen.
-
From the Main Menu, select 9. Stacking... —> 4. Stack Management
-
Use the down arrow key to select the Member to remove from the stack.
-
Type D (for Delete) to remove the selected Member from the stack.
-
To continue deleting the selected Member, press the Space bar once to select Yes for the prompt, then press Enter to complete the deletion. The Stack Management screen updates to show the new stack Member list.
