Synchronizing BGP-IGP

BGP-IGP synchronization commands

Command syntax	Description	CLI reference
[no] `redistribute protocol` [route-map `route-map-name`]	Specifies routes to export into BGP. This command causes routes from the specified protocol to be considered for redistribution into BGP.	Specifying routes to export into BGP
[no] `neighbor ipv4-addr route-map route-map-name` [[in] \| [out]]	Route maps control the redistribution of routes between protocols.	Specifying route map to be exported in or out of BGP

Specifying routes to export into BGP

Syntax:

[no] redistribute protocol [route-map route-map-name]

Specifies routes to export into BGP. This command causes routes from the specified protocol to be considered for redistribution into BGP. Additionally, if a route map is specified, then routes from the specified protocol that match the named route map will be considered for redistribution into the current protocol. If the referenced route map has not yet been configured, then an empty route map is created with the specified name.

Specifying route map to be exported in or out of BGP

Syntax:

[no] neighbor ipv4-addr route-map route-map-name [[in] | [out]]

Route maps control the redistribution of routes between protocols. Only after configuring a route map, can it then be specified in BGP. Use this command to specify a configured route map to be exported into or out of BGP. When the in version of this command is configured, all IPv4 announcements received from the specified neighbor should be run against the policy specified in the named route-map. When the out version of this command is used, it specifies that all IPv4 announcements sent to the specified neighbor should be run against the policy specified in the named route-map. After evaluating this policy, each route will be compared to the specified route-target export, to see if announcement is acceptable.

prev	up	next
Neighbor configuration and neighbor policy configuration	home	BGP path attributes