ip-subnet-vlan

Use ip-subnet-vlan to associate a VLAN with the specified IP subnet or IP address.

Use undo ip-subnet-vlan to disassociate a VLAN from the specified IP subnet or IP address.

Syntax

ip-subnet-vlan [ ip-subnet-index ] ip ip-address [ mask ]

undo ip-subnet-vlan { ip-subnet-index [ to ip-subnet-end ] | all }

Default

A VLAN is not associated with an IP subnet or IP address.

Views

VLAN view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-subnet-index: Specifies a beginning IP subnet index in the range of 0 to 65535. The value can be configured by users. It can also be automatically numbered by the system based on the order in which the IP subnets or IP addresses are associated with the VLAN.

ip ip-address [ mask ]: Specifies the source IP address or network address that is associated with the VLAN. The ip-address argument specifies the source IP address or network address in dotted decimal notation. The mask argument is the subnet mask of the source IP address or network address, in dotted decimal notation with a default value of 255.255.255.0.

to ip-subnet-end: Specifies an end IP subnet index of an IP subnet index range, in the range of 0 to 65535. The value for the ip-subnet-end argument must be greater than or equal to the beginning IP subnet index.

all: Specifies all IP subnets or IP addresses that are associated with the VLAN.

Usage guidelines

The IP subnet or IP address cannot be a multicast network segment or a multicast address.

Examples

# Configure VLAN 3 as an IP subnet-based VLAN and associate it with the subnet 192.168.1.0/24.

<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] ip-subnet-vlan ip 192.168.1.0 255.255.255.0

Related commands

display protocol-vlan interface

display protocol-vlan vlan

port hybrid protocol-vlan