Configuration example
Network requirements
As shown in Figure 16, the device is running SNMP.
Configure the device to allow Host A and Host B to access the device through SNMP.
Figure 16: Network diagram
Configuration procedure
# Create an ACL to permit packets sourced from Host A and Host B.
<Sysname> system-view [Sysname] acl basic 2000 match-order config [Sysname-acl-ipv4-basic-2000] rule 1 permit source 10.110.100.52 0 [Sysname-acl-ipv4-basic-2000] rule 2 permit source 10.110.100.46 0 [Sysname-acl-ipv4-basic-2000] quit
# Associate the ACL with the SNMP community and the SNMP group.
[Sysname] snmp-agent community read aaa acl 2000 [Sysname] snmp-agent group v2c groupa acl 2000 [Sysname] snmp-agent usm-user v2c usera groupa acl 2000