smartsan enable

Use smartsan enable to enable Smart SAN.

Use undo smartsan enable to disable Smart SAN.

Syntax

smartsan enable [ fcoe | iscsi ]

undo smartsan enable [ fcoe | iscsi ]

Default

Smart SAN is disabled.

Views

System view

Predefined user roles

network-admin

Parameters

fcoe: Specifies Smart SAN for FC/FCoE.

iscsi: Specifies Smart SAN for iSCSI. This keyword is not supported in the current software version.

Usage guidelines

Only FCF and FCF-NPV switches support this command.

If you do not specify the fcoe or iscsi keyword, Smart SAN is enabled or disabled for both FC/FCoE and iSCSI.

The undo smartsan enable command deletes local peer zone information, but not peer zone information received from other switches. For more information about peer zones, see FC and FCoE Configuration Guide.

Examples

# Enable Smart SAN for both FC/FCoE and iSCSI.

<Sysname> system-view
[Sysname] smartsan enable

# Enable Smart SAN for FC/FCoE.

<Sysname> system-view
[Sysname] smartsan enable fcoe

# Enable Smart SAN for iSCSI.

<Sysname> system-view
[Sysname] smartsan enable iscsi

Related commands

display smartsan status