rscn aggregation timer

Use rscn aggregation timer to set the RSCN aggregation timer.

Use undo rscn aggregation timer to restore the default.

Syntax

rscn aggregation timer value

undo rscn aggregation timer

Default

The RSCN aggregation timer is 2000 milliseconds.

Views

VSAN view

Predefined user roles

network-admin

Parameters

value: Specifies the RSCN aggregation timer value in the range of 100 to 2000 milliseconds.

Usage guidelines

Only FCF switches and VSANs operating in FCF mode support this command.

The RSCN aggregation timer takes effect only when RSCN aggregation is enabled.

As a best practice, enable RSCN aggregation and set the same RSCN aggregation timer value on all switches in a VSAN.

Examples

# Set the RSCN aggregation timer of VSAN 1 to 1500 milliseconds.

<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] rscn aggregation timer 1500

Related commands

rscn aggregation enable