display irf link

Use display irf link to display IRF link information, including IRF ports, IRF physical interfaces, and IRF link status.

Syntax

display irf link

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display IRF link information.

<Sysname> display irf link
Member 1
 IRF Port    Interface                       Status
 1           Ten-GigabitEthernet1/0/33       UP
             Ten-GigabitEthernet1/0/34       DOWN
             Ten-GigabitEthernet1/0/35       DOWN
             Ten-GigabitEthernet1/0/36       DOWN
 2           disable                         --
Member 2
 IRF Port    Interface                       Status
 1           disable                         --
 2           Ten-GigabitEthernet2/0/33       UP
             Ten-GigabitEthernet2/0/34       DOWN
             Ten-GigabitEthernet2/0/35       DOWN
             Ten-GigabitEthernet2/0/36       DOWN

Table 3: Command output

Field	Description
Member ID	IRF member ID.
IRF Port	IRF port number: 1—IRF-port 1. 2—IRF-port 2.
Interface	Physical interfaces bound to the IRF port. This field displays disable if no physical interfaces have been bound to the IRF port.
Status	Link state of the IRF physical interface: UP—The link is up. DOWN—The link is down. ADM—The interface has been manually shut down by using the shutdown command. ABSENT—Interface module that hosts the interface is not present.

prev	up	next
display irf configuration	home	display irf topology