display irf configuration
Use display irf configuration to display basic IRF settings, including each member's current member ID, new member ID, and physical interfaces bound to the IRF ports. The new member IDs take effect at reboot.
Syntax
display irf configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display basic IRF settings.
<Sysname> display irf configuration
MemberID NewID IRF-Port1 IRF-Port2
2 2 Ten-GigabitEthernet2/0/25 Ten-GigabitEthernet2/0/26
5 5 Ten-GigabitEthernet5/0/25 Ten-GigabitEthernet5/0/26
Ten-GigabitEthernet5/0/27
Ten-GigabitEthernet5/0/28
10 10 Ten-GigabitEthernet10/0/25 Ten-GigabitEthernet10/0/26
Ten-GigabitEthernet10/0/27
Ten-GigabitEthernet10/0/28
Table 2: Command output
Field | Description |
|---|---|
MemberID | Current member ID of the device. |
NewID | Member ID assigned to the device. This member ID takes effect at reboot. |
IRF-Port1 | Physical interfaces bound to IRF-port 1. The bindings take effect at reboot. This field displays disable if no physical interfaces are bound to the IRF port. |
IRF-Port2 | Physical interfaces bound to IRF-port 2. The bindings take effect at reboot. This field displays disable if no physical interfaces are bound to the IRF port. |
Related commands
display irf
display irf topology