display ipv6 dhcp server conflict
Use display ipv6 dhcp server conflict to display information about IPv6 address conflicts.
Syntax
display ipv6 dhcp server conflict [ address ipv6-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays conflict information for the specified IPv6 address. If you do not specify an IPv6 address, this command displays information about all IPv6 address conflicts.
Usage guidelines
The DHCPv6 server creates IP address conflict information in the following conditions:
The DHCPv6 client sends a DECLINE packet to the DHCPv6 server to inform the server of an IPv6 address conflict.
The DHCPv6 server discovers that the only assignable address in the address pool is its own IPv6 address.
Examples
# Display information about all address conflicts.
<Sysname> display ipv6 dhcp server conflict IPv6 address Detect time 2001::1 Apr 25 16:57:20 2007 1::1:2 Apr 25 17:00:10 2007
Table 57: Command output
Field | Description |
---|---|
IPv6 address | Conflicted IPv6 address. |
Detect time | Time when the conflict was discovered. |
Related commands
reset ipv6 dhcp server conflict