display ipv6 dhcp server

Use display ipv6 dhcp server to display DHCPv6 server configuration information.

Syntax

display ipv6 dhcp server [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Displays DHCPv6 server configuration information for the specified interface. If you do not specify an interface, this command displays DHCPv6 server configuration information for all interfaces.

Examples

# Display DHCPv6 server configuration information for all interfaces.

<Sysname> display ipv6 dhcp server
Interface             Pool
Vlan-interface2       1
Vlan-interface3       global

# Display DHCPv6 server configuration information for the interface VLAN-interface 2.

<Sysname> display ipv6 dhcp server interface vlan-interface 2
Using pool: 1
Preference value: 0
Allow-hint: Enabled
Rapid-commit: Disabled

Table 56: Command output

Field

Description

Interface

Interface enabled with DHCPv6 server.

Pool

Address pool applied to the interface.

If no address pool is applied to the interface, global is displayed. The DHCPv6 server selects a global address pool to assign a prefix, an address, and other configuration parameters to a client.

Using pool

Address pool applied to the interface.

If no address pool is applied to the interface, global is displayed. The DHCPv6 server selects a global address pool to assign a prefix, an address, and other configuration parameters to a client.

Preference value

Server preference in the DHCPv6 Advertise message. The value range is 0 to 255. The bigger the value is, the higher preference the server has.

Allow-hint

Indicates whether desired address/prefix assignment is enabled.

Rapid-commit

Indicates whether rapid address/prefix assignment is enabled.