cfd ais-track link-status level
Use cfd ais-track link-status level to configure the EAIS frame transmission level.
Use undo cfd ais-track link-status level to restore the default.
Syntax
cfd ais-track link-status level level-value
undo cfd ais-track link-status level
Default
The EAIS frame transmission level is not configured.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
level level-value: Specifies the EAIS frame transmission level in the range of 0 to 7.
Usage guidelines
If no EAIS frame transmission level is configured on a port, the port cannot send EAIS frames.
Follow these guidelines when you use this command:
Configurations in Ethernet interface view take effect only on the current interface.
Configurations in aggregate interface view take effect on the aggregate interface and all its member ports.
Configurations on a member port take effect only when the member port leaves the aggregation group.
Examples
# Configure the EAIS frame transmission level as 3 on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] cfd ais-track link-status level 3
Related commands
cfd ais-track link-status global
cfd ais-track link-status period
cfd ais-track link-status vlan