oam remote-loopback interface

Use oam remote-loopback start interface to enable Ethernet OAM remote loopback on an Ethernet port.

Use oam remote-loopback stop interface to disable Ethernet OAM remote loopback on an Ethernet port.

Syntax

oam remote-loopback start interface interface-type interface-number

oam remote-loopback stop interface interface-type interface-number

Default

Ethernet OAM remote loopback is disabled on an Ethernet port.

Views

User view, system view

Predefined user roles

network-admin

Parameters

interface-type interface-number: Specifies a port by its type and number.

Usage guidelines

Ethernet OAM remote loopback is available only after the Ethernet OAM connection is established and can be performed only by the Ethernet OAM entities operating in active Ethernet OAM mode.

You can enable Ethernet OAM remote loopback on a specified port in user view or system view, or enable it on the current port in port view. The configurations have the same effect.

Examples

# Configure the active Ethernet OAM mode and enable Ethernet OAM on Ten-GigabitEthernet 1/0/1, and then enable Ethernet OAM remote loopback on Ten-GigabitEthernet 1/0/1 in system view.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] oam mode active
[Sysname-Ten-GigabitEthernet1/0/1] oam enable
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] oam remote-loopback start interface ten-gigabitethernet 1/0/1

Related commands

• oam enable

• oam mode

• oam remote-loopback