oam remote-loopback reject-request

Use oam remote-loopback reject-request to configure a port to reject the Ethernet OAM remote loopback request from a remote port.

Use undo oam remote-loopback reject-request to restore the default.

Syntax

oam remote-loopback reject-request

undo oam remote-loopback reject-request

Default

A port does not reject the Ethernet OAM remote loopback request from a remote port.

Views

Layer 2 Ethernet port view, Layer 3 Ethernet port view

Predefined user roles

network-admin

Usage guidelines

If a port is in loopback state when you execute the oam remote-loopback reject-request command, the configuration takes effect when the next loopback starts.

Examples

# Configure Ten-GigabitEthernet 1/0/1 to reject the Ethernet OAM remote loopback request from a remote port.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] oam remote-loopback reject-request