Specifying a VTEP group as the gateway for an access layer VTEP
Before you specify a VTEP group on an access layer VTEP, perform the following tasks on the VTEP:
Configure VSIs and VXLANs.
Set up VXLAN tunnels to remote sites and the VTEP group, and assign the tunnels to VXLANs.
To specify a VTEP group as the gateway for an access layer VTEP:
Step | Command | Remarks |
---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify a VTEP group and all its member VTEPs. | vtep group group-ip member remote member-ip&<1-8> | By default, no VTEP group is specified. |