circuit-cost
Use circuit-cost to set a global IPv6 IS-IS link cost.
Use undo circuit-cost to remove the configuration.
Syntax
circuit-cost value [ level-1 | level-2 ]
undo circuit-cost [ level-1 | level-2 ]
Default
No global link cost is configured.
Views
IS-IS IPv6 unicast address family view
Predefined user roles
network-admin
Parameters
value: Specifies the link cost value. The value range varies by cost style.
For styles narrow, narrow-compatible, and compatible, the cost value is in the range of 0 to 63.
For styles wide and wide-compatible, the cost value is in the range of 0 to 16777215.
level-1: Applies the link cost to Level-1.
level-2: Applies the link cost to Level-2.
Usage guidelines
If no level is specified, the specified cost applies to both Level-1 and Level-2.
Examples
# Set the global Level-1 IPv6 link cost of IS-IS process 1 to 11.
<Sysname> system-view [Sysname] isis 1 [Sysname-isis-1] address-family ipv6 [Sysname-isis-1-ipv6] circuit-cost 11 level-1
Related commands
cost-style
isis cost