bandwidth-reference

Use bandwidth-reference to set the bandwidth reference value for automatic link cost calculation.

Use undo bandwidth-reference to restore the default.

Syntax

bandwidth-reference value

undo bandwidth-reference

Default

The bandwidth reference value is 100 Mbps.

Views

IS-IS IPv6 unicast address family view

Predefined user roles

network-admin

Parameters

value: Specifies the bandwidth reference value in the range of 1 to 2147483648 Mbps.

Examples

# Set the IPv6 bandwidth reference to 200 Mbps for IS-IS process 1.

<Sysname> system-view
[Sysname-isis-1] address-family ipv6
[Sysname-isis-1-ipv6] bandwidth-reference 200

Related commands

auto-cost enable

isis cost