apply precedence
Use apply precedence to set a precedence for IP packets.
Use undo apply precedence to restore the default.
Syntax
apply precedence { type | value }
undo apply precedence
Default
No precedence is set for IP packets.
Views
Policy node view
Predefined user roles
network-admin
Parameters
type: Specifies the precedence type for IP packets.
value: Specifies the precedence for IP packets. Eight precedence values (0 to 7) are available. Each precedence value corresponds to a precedence type, as shown in Table 119. You can set either a precedence value or a precedence type for IP packets.
Table 119: IP precedences and corresponding types
Precedence value | Precedence type |
|---|---|
0 | routine |
1 | priority |
2 | immediate |
3 | flash |
4 | flash-override |
5 | critical |
6 | internet |
7 | network |
Examples
# Set the precedence to 5 (critical) for IP packets.
<Sysname> system-view [Sysname] policy-based-route aa permit node 11 [Sysname-pbr-aa-11] apply precedence critical