Configuring the device as an IPv6 TFTP client

1. Enter system view.

system-view

N/A

2. (Optional.) Use an ACL to control the client's access to TFTP servers.

tftp-server ipv6 acl ipv6-acl-number

By default, no ACL is used for access control.

3. Specify the source IPv6 address for TFTP packets sent by the TFTP client.

tftp client ipv6 source { interface interface-type interface-number | ipv6 source-ipv6-address }

By default, no source IPv6 address is specified. The source address is automatically selected as defined in RFC 3484.

4. Return to user view.

quit

N/A

5. Download or upload a file in an IPv6 network.

tftp ipv6 tftp-server [ -i interface-type interface-number ] { get | put | sget } source-filename [ destination-filename ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source { interface interface-type interface-number | ipv6 source-ipv6-address } ] *

The source IP address specified in this command takes precedence over the one set by the tftp client ipv6 source command.

Use this command in user view.