Configuring the device as an IPv4 TFTP client

1. Enter system view.

system-view

N/A

2. (Optional.) Use an ACL to control the client's access to TFTP servers.

tftp-server acl acl-number

By default, no ACL is used for access control.

3. Specify the source IP address for TFTP packets sent by the TFTP client.

tftp client source { interface interface-type interface-number | ip source-ip-address }

By default, no source IP address is specified. The device uses the primary IP address of the output interface as the source IP address.

4. Return to user view.

quit

N/A

5. Download or upload a file in an IPv4 network.

tftp tftp-server { get | put | sget } source-filename [ destination-filename ] [ vpn-instance vpn-instance-name ] [ dscp dscp-value | source { interface interface-type interface-number | ip source-ip-address } ] *

The source IP address specified in this command takes precedence over the one set by the tftp client source command.

Use this command in user view.