display lldp local-information

Use display lldp local-information to display local LLDP information, which will be contained in the advertisable LLDP TLVs and sent to neighboring devices.

Syntax

display lldp local-information [ global | interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

global: Displays the global local LLDP information.

interface interface-type interface-number: Specifies a port by its type and number.

Usage guidelines

If no keyword or argument is specified, this command displays all local LLDP information, which includes the following:

The global LLDP information.
The LLDP information about the LLDP-enabled ports in up state.

Examples

# Display all local LLDP information. (In this example, the DCBX version is IEEE Std 802.1Qaz-2011.)

<Sysname> display lldp local-information
Global LLDP local-information:
 Chassis ID          : 0cda-415e-232e
 System name         : Sysname
 System description  : HPE Comware Platform Software, Software Version 7.1.046,
                       Release 2422P01
                       HPE 5900AF-48XG-4QSFP+ Switch
                       Copyright (c) 2010-2015 Hewlett Packard Enterprise Develo
                       pment LP
 System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge
 System capabilities enabled   : Bridge, Router, Customer Bridge
 MED information:
 Device class               : Connectivity device
 MED inventory information of master board:
 HardwareRev                : Ver.B
 FirmwareRev                : 125
 SoftwareRev                : 7.1.046 Release 2422P01
 SerialNum                  : 210235A0U0H12A000065
 Manufacturer name          : HPE
 Model name                 : Unknown
 Asset tracking identifier  : Unknown
LLDP local-information of port 1[Ten-GigabitEthernet1/0/1]:
 Port ID type        : Interface name
 Port ID             : Ten-GigabitEthernet1/0/1
 Port description    : Ten-GigabitEthernet1/0/1 Interface
 LLDP agent nearest-bridge management address:
 Management address type           : All802
 Management address                : 0cda-415e-2357
 Management address interface type : IfIndex
 Management address interface ID   : Unknown
 Management address OID            : 0
 LLDP agent nearest-nontpmr management address:
 Management address type           : All802
 Management address                : 0cda-415e-2357
 Management address interface type : IfIndex
 Management address interface ID   : Unknown
 Management address OID            : 0
 LLDP agent nearest-customer management address:
 Management address type           : All802
 Management address                : 0cda-415e-2357
 Management address interface type : IfIndex
 Management address interface ID   : Unknown
 Management address OID            : 0
 DCBX Control info:
  Oper version       : Ver 1.00
  Sequence number    : 6
  Acknowledge number : 0
 DCBX ETS info:
  CoS     Local Priority      Percentage
  0       2                   6
  1       0                   2
  2       1                   4
  3       5                   19
  4       4                   11
  5       5                   19
  6       6                   27
  7       7                   31
 DCBX PFC info:
  P0-0     P1-0     P2-0     P3-0     P4-0     P5-1     P6-0     P7-0
 DCBX APP info:
  CoS map: 0x8
 Port VLAN ID(PVID)  : 1
 Port and protocol VLAN ID(PPVID)  : 0
 Port and protocol VLAN supported  : No
 Port and protocol VLAN enabled    : No
 VLAN name of VLAN 1        : VLAN 0001
 Management VLAN ID  : 0
 Link aggregation supported : Yes
 Link aggregation enabled   : No
 Aggregation port ID        : 0
 Auto-negotiation supported : Yes
 Auto-negotiation enabled   : Yes
 OperMau                    : Speed(10000)/Duplex(Full)
 Power port class           : PSE
 PSE power supported        : No
 PSE power enabled          : No
 PSE pairs control ability  : No
 Power pairs                : Signal
 Port power classification  : Class 0
 Maximum frame size         : 10000

Table 59: Command output

Field	Description
Chassis ID	Bridge MAC address of the device.
System capabilities supported	Supported capabilities: Bridge—Switching is supported. Router—Routing is supported. DocsisCableDevice—The local device can serve as a DOCSIS-compliant cable device. StationOnly—The local device can serve as a station only. Customer Bridge—The customer bridge function is supported. Service Bridge—The service bridge function is supported. TPMR—The two-port MAC relay (TPMR) function is supported. Other—Functions other than those listed above are supported.
System capabilities enabled	Enabled capabilities: Bridge—Switching is enabled. Router—Routing is enabled. DocsisCableDevice—The local device is serving as a DOCSIS-compliant cable device. StationOnly—The local device is serving as a station only. Customer Bridge—The customer bridge function is enabled. Service Bridge—The service bridge function is enabled. TPMR—The TPMR function is enabled. Other—Functions other than those listed above are enabled.
Device class	MED device class: Connectivity device—Network device. Class I—Normal terminal device. It requires the basic LLDP discovery services. Class II—Media terminal device. It supports media streams, and can also function as a normal terminal device. Class III—Communication terminal device. It supports the IP communication systems of end users, and can also function as a normal terminal device or media terminal device.
MED inventory information of master board	MED inventory information of the master board on the IRF device.
HardwareRev	Hardware version.
FirmwareRev	Firmware version.
SoftwareRev	Software version.
SerialNum	Serial number.
Manufacturer name	Device manufacturer.
Model name	Device model.
Port ID type	Port ID type: MAC address. Interface name.
Port ID	Port ID, the value of which varies with port ID type.
Management address interface type	Numbering type of the interface identified by the management address.
Management address interface ID	Index of the interface identified by the management address.
Management address OID	Management address object ID.
DCBX control info	Displayed as version information in IEEE Std 802.1Qaz-2011.
Oper version	DCBX version number.
Sequence number	Number of DCBX TLV content changes.
Acknowledge number	Times of synchronizing configurations by the peer device.
DCBX ETS info	CoS-to-local priority mapping and bandwidth allocation.
Percentage	Percentage of bandwidth allocated.
P0- P1- P2- P3- P4- P5- P6- P7-	Number of supported priorities configured by using the priority-flow-control no-drop dot1p dot1p-list command at the local end.
Number of traffic classes supported	Capability set supported by PFC (displayed only in Rev 1.01).
Priority	802.1p priority.
Protocol ID	Application protocol number.
CoS map	Application protocol-to-CoS mapping.
CBS	Indicates whether the token bucket mechanism is supported on the port: False—The token bucket mechanism is not supported. True—The token bucket mechanism is supported.
Max TCs	Maximum number of priorities supported.
TSA	Transmission selection algorithm.
Value of MBC	MBC indicates the ability of packets to bypass MACsec. It is 1-bit long. 0—Packets can bypass MACsec when MACsec is disabled. 1—Packets cannot bypass MACsec when MACsec is disabled.
Link aggregation supported	Indicates whether link aggregation is supported on the port.
Link aggregation enabled	Indicates whether link aggregation is enabled on the port.
Aggregation port ID	Member port ID, which is 0 when link aggregation is disabled.
Auto-negotiation supported	Indicates whether autonegotiation is supported on the port.
Auto-negotiation enabled	Indicates whether autonegotiation is enabled on the port.
OperMau	Speed and duplex state of the port.
Power port class	PoE port class: PSE—Power sourcing equipment. PD—Powered device.
PSE power supported	Indicates whether the device can operate as a PSE.
PSE power enabled	Indicates whether the device is operating as a PSE.
PSE pairs control ability	Indicates whether the PSE-PD pair control is available.
Power pairs	Power supply mode: Signal—Uses data pairs to supply power. Spare—Uses spare pairs to supply power.
Port power classification	Port power classification of the PD: Class 0. Class 1. Class 2. Class 3. Class 4.
Media policy type	Media policy type: unknown. voice. voiceSignaling. guestVoice. guestVoiceSignaling. softPhoneVoice. videoconferencing. streamingVideo. videoSignaling.
Unknown policy	Indicates whether the media policy is unknown.
VLAN tagged	Indicates whether packets of the media VLAN are tagged.
Media policy VLAN ID	ID of the media VLAN.
Media policy L2 priority	Layer 2 priority.
Media policy DSCP	DSCP value.

prev	up	next
dcbx version	home	display lldp neighbor-information