mrp timer leave

Use mrp timer leave to set the Leave timer.

Use undo mrp timer leave to restore the default.

Syntax

mrp timer leave timer-value

undo mrp timer leave

Default

The Leave timer is 60 centiseconds.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

Parameters

timer-value: Specifies the Leave timer value (in centiseconds). The Leave timer must meet the following requirements:

• Greater than two times the Join timer.

• Less than the LeaveAll timer.

• Divisible by 20.

Examples

# Set the Leave timer to 100 centiseconds. (In this example, the Join and LeaveAll timer use their default settings.)

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mrp timer leave 100

Related commands

display mvrp running-status

mrp timer join

mrp timer leaveall