mrp timer join

Use mrp timer join to set the Join timer.

Use undo mrp timer join to restore the default.

Syntax

mrp timer join timer-value

undo mrp timer join

Default

The Join timer is 20 centiseconds.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

Parameters

timer-value: Specifies the Join timer value (in centiseconds). The Join timer must meet the following requirements:

• Not less than 20.

• Less than half the Leave timer.

• Divisible by 20.

Examples

# Set the Join timer to 40 centiseconds. (In this example, the Leave timer is 100 centiseconds.)

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mrp timer join 40

Related commands

display mvrp running-status

mrp timer leave