using tengige

Use using tengige to split a high-bandwidth interface into multiple 10-GE breakout interfaces.

Use undo using tengige to cancel the configuration.

Syntax

using tengige

undo using tengige

Default

A high-bandwidth interface is not split and operates as a single interface.

Views

40-GE interface view

Predefined user roles

network-admin

Usage guidelines

To improve the port density, reduce the cost, and improve the network flexibility, you can split a high-bandwidth interface into multiple 10-GE breakout interfaces.

The 10-GE breakout interfaces support the same configuration and attributes as common 10-GE interfaces, except that they are numbered in a different way.

After this command is successfully configured, the system prompts you to reboot your device. You must reboot the device and then the system deletes the 40-GE interface and creates four 10-GE breakout interfaces.

Examples

# Split 40-GE interface FortyGigE 1/0/16 into four 10-GE breakout interfaces.

<System> system-view
[System] interface fortygige 1/0/16
[System-FortyGigE1/0/16] using tengige
The interface FortyGigE1/0/16 will be deleted. Continue? [Y/N]:y
Reboot the member device to make the configuration take effect.

Related commands

using fortygige