using fortygige

Use using fortygige to combine four 10-GE breakout interfaces that are split from a 40-GE interface into a 40-GE interface.

Use undo using fortygige to cancel the configuration.

Syntax

using fortygige

undo using fortygige

Default

A 40-GE interface is not split and operates as a single interface.

Views

10-GE breakout interface view

Predefined user roles

network-admin

Usage guidelines

If you need higher bandwidth, you can combine four 10-GE breakout interfaces that are split from a 40-GE interface into a 40-GE interface. To make this command take effect on the four 10-GE breakout interfaces, execute this command on only one of the 10-GE breakout interfaces.

After this command is successfully configured, the system prompts you to reboot your device. You must reboot the device and then the system deletes the four 10-GE breakout interface and creates the combined 40-GE interface.

Examples

# Combine 10-GE breakout interfaces Ten-GigabitEthernet 1/0/16:1 through Ten-GigabitEthernet 1/0/16:4 into a 40-GE interface.

<System> system-view
[System] interface Ten-GigabitEthernet1/0/16:1
[System-Ten-GigabitEthernet1/0/16:1] using fortygige
The interfaces Ten-GigabitEthernet1/0/16:1 through Ten-GigabitEthernet1/0/16:4 will be deleted. Continue? [Y/N]:y
Reboot the member device to make the configuration take effect.

Related commands

using tengige