VLAN mapping configuration task list
![[IMPORTANT: ]](images/important.png) | IMPORTANT: Use the appropriate VLAN mapping methods for the devices in the network. | |
To configure VLAN mapping:
Tasks at a glance | Remarks |
|---|---|
Configure one-to-one VLAN mapping on the wiring-closet switch, as shown in Figure 58. | |
Configure many-to-one VLAN mapping on the campus switch, as shown in Figure 58. Complete one of the tasks based on the IP address assignment method. | |
Configure one-to-two VLAN mapping on PE 1 and PE 4, as shown in Figure 59, through which traffic from customer networks enter the service provider networks. | |
Configure two-to-two VLAN mapping on PE 3, as shown in Figure 59, which is an edge device of the SP 2 network. |