[x]
Spanning tree configuration task lists > MSTP configuration task list
Next
Tasks at a glance
Configuring the root bridge:
(Required.) Setting the spanning tree mode
(Required.) Configuring an MST region
(Optional.) Configuring the root bridge or a secondary root bridge
(Optional.) Configuring the device priority
(Optional.) Configuring the maximum hops of an MST region
(Optional.) Configuring the network diameter of a switched network
(Optional.) Configuring spanning tree timers
(Optional.) Configuring the timeout factor
(Optional.) Configuring the BPDU transmission rate
(Optional.) Configuring edge ports
(Optional.) Configuring the port link type
(Optional.) Configuring the mode a port uses to recognize and send MSTP packets
(Optional.) Enabling outputting port state transition information
(Required.) Enabling the spanning tree feature
Configuring the leaf nodes:
(Optional.) Configuring path costs of ports
(Optional.) Configuring the port priority
(Optional.) Performing mCheck
(Optional.) Configuring Digest Snooping
(Optional.) Configuring No Agreement Check
(Optional.) Configuring TC Snooping
(Optional.) Configuring protection functions
(Optional.) Disabling the device to reactivate the shutdown edge ports
(Optional.) Enabling SNMP notifications for new-root election and topology change events