Configuring aggregate CAR by using the MQC approach
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Configure an aggregate CAR action. | qos car car-name aggregative cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] [ green action | red action | yellow action ] * qos car car-name aggregative cir committed-information-rate [ cbs committed-burst-size ] pir peak-information-rate [ ebs excess-burst-size ] [ green action | red action | yellow action ] * | Use either command. By default, no aggregate CAR action is configured. |
3. Enter traffic behavior view. | traffic behavior behavior-name | N/A |
4. Use the aggregate CAR in the traffic behavior. | car name car-name | By default, no aggregate CAR action is used in a traffic behavior. |