Configuration procedure

1. Enter system view.

system-view

N/A

2. Create a traffic class and enter traffic class view.

traffic classifier classifier-name [ operator { and | or } ]

By default, no traffic classes exist.

3. Configure a match criterion.

if-match match-criteria

By default, no match criterion is configured for a traffic class.

For more information about the match criteria, see the if-match command in ACL and QoS Command Reference.

4. Return to system view.

quit

N/A

5. Create a traffic behavior and enter traffic behavior view.

traffic behavior behavior-name

By default, no traffic behaviors exist.

6. Configure a VLAN tag adding action.

nest top-most vlan vlan-id

By default, no VLAN tag adding action is configured for a traffic behavior.

7. Return to system view.

quit

N/A

8. Create a QoS policy and enter QoS policy view.

qos policy policy-name

By default, no QoS policies exist.

9. Associate the traffic class with the traffic behavior in the QoS policy.

classifier classifier-name behavior behavior-name [ insert-before before-classifier-name ]

By default, a traffic class is not associated with a traffic behavior.

10. Return to system view.

quit

N/A

11. Apply the QoS policy.

• Applying the QoS policy to an interface

• Applying the QoS policy to VLANs

• Applying the QoS policy globally

• Applying the QoS policy to a control plane

Choose one of the application destinations as needed.

By default, no QoS policy is applied.