Applying the QoS policy globally
You can apply a QoS policy globally to the inbound or outbound direction of all ports.
If the hardware resources of an IRF member device are insufficient, applying a QoS policy globally might fail on the IRF member device. The system does not automatically roll back the QoS policy configuration already applied to other IRF member devices. To ensure consistency, use the undo qos apply policy global command to manually remove the QoS policy configuration applied to them.
To apply the QoS policy globally:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Apply the QoS policy globally. | qos apply policy policy-name global { inbound | outbound } | By default, no QoS policy is applied globally. |